Vanities

Bathroom Vanity Installation in Winter Park & Altamonte Springs, FL

A vanity is the single biggest visual element in most bathrooms — and the part most likely to expose poor workmanship. M&E Custom Concepts installs custom and prefab bathroom vanities, stone tops, sinks, faucets, mirrors, and surrounding tile work for homeowners across Winter Park, Orlando, and Central Florida.

We coordinate the vanity, the countertop, the plumbing rough-in, and the wall finishes so the final install looks built-in, not bolted on. No gaps at the wall, no unlevel drawers, no awkward returns where the counter meets the tile.

From a single powder-room float vanity to a primary suite with double 84-inch vanities, dressing-table inserts, and full-height stone splashes — we've done it.

Problems We Solve

Homeowners, designers, builders, and commercial property managers across Central Florida call M&E Custom Concepts when they need work done right the first time. Below are the issues we hear about most — and fix every week.

  • Vanities sitting unlevel because the floor wasn't shimmed properly.
  • Stone tops sliding or cracking because they weren't supported on the cabinet frame.
  • Plumbing rough-ins that don't line up with the cabinet, leaving exposed escutcheons or weird patches.
  • Wall-mounted (floating) vanities pulling away from the wall because the blocking wasn't installed.
  • Drawer and door alignment issues from cheap installs that skipped adjustment.
  • Caulk lines that look wavy or peel away after a few months.

Materials We Install

We work with premium materials sourced from trusted suppliers in Florida and abroad. Every selection is matched to your project's use, climate, and budget.

Custom Cabinetry

Site-built and custom shop cabinets in maple, walnut, white oak, and painted finishes — sized for non-standard rough-ins.

Semi-Custom & Prefab Vanities

Quality prefab lines (Wyndham, James Martin, Fairmont, etc.) installed correctly with proper anchoring and adjustment.

Stone & Quartz Tops

Quartz, granite, marble, and quartzite tops with under-mount sinks — templated to your exact rough-in.

Wall-Mounted (Floating) Vanities

Floating vanities anchored to engineered blocking with concealed brackets — held strong, looks light.

Sinks & Faucets

Under-mount, vessel, and integrated sinks; widespread, single-hole, and wall-mount faucets — installed and tested.

Tile Surrounds & Backsplashes

Tile or stone backsplashes, full-height surrounds, and niche details done by the same crew as the vanity.

Our Installation Process

We follow industry-standard methods (TCNA, ANSI, and manufacturer specifications) so your installation lasts. No shortcuts, no guesswork.

Step 1

Verify rough-in & blocking

Before the vanity arrives we confirm plumbing locations, electrical, and that wall blocking is in for floating vanities. Surprises here cause 90% of bad installs.

Step 2

Set, level & anchor

Vanities are shimmed level and plumb, then anchored to studs (not just drywall). Floating units bolt into solid blocking, not toggle anchors.

Step 3

Top, sink & faucet install

Stone tops are templated after the cabinet is set, then under-mount sinks are clipped and silicone-sealed before the top goes on. Faucets and drains are installed and pressure-tested.

Step 4

Adjust drawers & doors

Every door and drawer is adjusted for even reveals and soft-close action. We don't leave with anything misaligned.

Step 5

Caulk, trim & finish

Color-matched silicone at top-to-wall, top-to-splash, and base-to-floor. Toe kicks scribed, trim returns clean, no exposed gaps.

Residential Projects

Vanity installation is primarily residential — primary baths, guest baths, powder rooms, and pool baths. We frequently install vanities as part of a larger bathroom remodel, but we also do standalone vanity-and-top swaps when the rest of the bathroom is staying.

Serving Central Florida

M&E Custom Concepts is based in Winter Park and installs vanities throughout Orlando, Maitland, Altamonte Springs, Lake Mary, Kissimmee, Sanford, and Oviedo. A standalone vanity replacement usually takes one day from arrival to working sink.

  • Winter Park, FL
  • Orlando, FL
  • Maitland, FL
  • Altamonte Springs, FL
  • Lake Mary, FL
  • Kissimmee, FL
  • Sanford, FL
  • Oviedo, FL

Why M&E Custom Concepts

Cabinet, top, sink, faucet, and tile work all handled by one crew.

Proper blocking and anchoring for floating vanities — they stay put.

Drawers and doors adjusted before we leave, not 'later.'

Stone tops templated to your real walls (which are never perfectly square).

Plumbing coordinated so connections are clean, accessible, and leak-tested.

Licensed and insured.

Ready to start your project?

Free, no-obligation quotes for homeowners and commercial clients across Winter Park, Orlando, and Central Florida. Most quotes returned within 1–2 business days.

FAQ

Frequently Asked Questions